P/N : HL-MN-3GSDI-1Vv1D-T/RL

Fiber
Wavelength	1310nm-1550nm
Bit rate	3Gbps
Tx power	＞-5db
Rx sensitivity	＞-14db
Fiber connector	LC
Video
Standard	SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI
Input/Output rate	2.97Gbit/s
Support resolution	1080P60Hz  1080P59.94Hz   1080P30Hz   1080P25Hz   1080P24Hz  1080i60Hz    1080i50Hz    1080P50Hz   720P60Hz    720P50Hz   PAL(576i50Hz)       NTSC（480i60Hz）
Alternating-current impedance	75ohms
The signal swing	800mV±10%
Physical interface	（-75 BNC connector）
Data
Level type	RS485（2 wiring system）
Error rate	<10^-9
Rate	0-400Kbps
Physical interface	Phoenix terminal
Other Parameters
Operating temperature	-20°C ~75°C
Storage temperature	-40°C ~85°C
Power supply mode	5V
Power dissipation	＜1.5W
Power physical interface	micro-USB

Attention

Lightning protection, static electricity and grounding : It is recommended that when install the device, consideration should be given to the impact of grounding by lightning, and take prevention measures. Strong static electricity will damage the optical device and data chip in the equipment. It is recommended that when plug/unplug the data port of the optical converter, please disconnect the power supply of the optical converter first. 1. Fiber and optical components Be careful when plugging the optical fiber as optical components of the optical converter is very fragile, and it should avoid causing damage to the optical components. It should be noted that the light source produced by the optical components of the optical converter will be harmful to eyes, so do not have direct eye contact with the optical components of optical converter. if you need to detect the optical power of the optical converter, please use the optical power meter. 2. Equipment and installation procedures (1) Optical fiber installation: please carefully insert the optical fiber into the optical fiber interface of the optical terminal after confirming that the optical fiber link meets the installation requirements. (2) Equipment installation: the 3GSDI video interface is a standard BNC, and the fiber optical converter is divided into transmitter and receiver. It is stated clearly on the printed label on the equipment.

Packing List

HL-MN-3GSDI-1Vv1D-TL Transmitter 1pcs HL-MN-3GSDI-1Vv1D-RL Receiver 1pcs Micro-usb cable + 5V adapter 1 pair User manual

Model Number		Fiber Mode	Transmission Distance	Fiber Connector
Transmitter	Receiver
HL-MN-3GSDI-1Vv-TL	HL-MN-3GSDI-1Vv-RL		20km	LC
HL-MN-3GSDI-1Vv1D-TL	HL-MN-3GSDI-1Vv1D-RL		20km	LC
Note: • The Optical Power Budget data fit Multi-mode(62.5/125 m),Single-Mode(9/125m). • Optical transmission distance is is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.And is compatible with (for standalone) US, European, UK and Australian power plug.